Note: Modified and updated on 2020.09.1.

This page is about basic configuration of jSpace installed in EVE-PRO or VMware Fusion. I will go further to include configuration in EVE-PRO.

Note: jSpace need to be connected to a network which has access to Internet.

MacBook Pro is external, connected to internet and used for configuration inside terminal and Firefox. Appears in picture just just for understanding the configuration and use of jSpace.

1 – Click jSpace. It will be opened in EVE-PRO.

2 – You will be asked to enter user and password respectively also for UNIX password.

• Username: admin
• Password abc123

3 – After this you will be asked to change the password. Choose your new password according to the local instructions. Otherwise you may fail to set a proper password.

[sudo] password for admin: Juniper123Juniper123 (- the_configured_password)

4 – Press enter and continue. Configuration Eth0 will start.

Choose the type of node to be installed [S/F] S

Configuring Eth0:

1) Configure UPv4
2) Configure Both IPv4 and IPv6

R) Redraw Menu 

5 – Click 1 and continue

Choice [1-2,R]: 1

Please enter new IPv4 address for interface eth0
192.168.100.199
Please enter new IPv4 subnet mask for interface eth0
255.255.255.0

Enter the default IPv4 gateway as a dotted-decimal IP address:
192.168.100.1

Please type the IPv4 nameservicer address in dotted decimal notation:
8.8.8.8

Configure a separate interface for device management? [y/N] n

Will this Junos Space system be added to an existing cluster? [y/N] n

6 – Web GUI configuration

Configuring IP address for web GUI:

1) Configure IPv4

R) Redraw Menu

Chose [1,R]: 1

Please enter IPv4 Address for web GUI:
192.168.100.200

Do you want to enable NAT service? [y/N] n

Add NTP Server? [y/N] y

Please type the new NTP server: 192.168.100.1

Please enter display name for this node: jSpace

Enter password for cluster maintenance mode: Juniper123Juniper123 (-   mine_password) 
Re-enter password: Juniper123Juniper123 (- mine_password)

-----

A> Apply settings

-----

Chose [ACQR]: A

Note: For Please type the new NTP server: 192.168.100.1 which is default IPv4 gateway you can use also something external like 82.197.221.30

Here is an image but all to do list is up